SHIMANO STEPS SM-CRE80 12-speed Chainring | Steel | 104 BCD

The SHIMANO SM-CRE80 12-speed chainring is optimised for use on eMTBs. The chainring made of steel can therefore permanently cope with the enormous drive forces of the motor. The Dynamic Chain Engagement technology also contributes to the low wear.

Optimised for the STEPS E7000/E8000/EP8 drivetrains with the corresponding crank, the chainline depends on the spider or crank and is ultimately 50mm, 53mm or 56.5mm. It is available in sizes 34T-38T.

Features of the SM-CRE80 12-speed chainring

• Optimised for eMTB
• Single chainring as original spare part
• Steel
• Offset – 0 mm
• Dynamic Chain Engagement Technology
• Black

Technology

Dynamic Chain Engagement +
The special tooth profile improves the chain guide and distributes the driving forces of the chain better over the chainring, thus reducing abrasion

Specifications

Manufacturer:	Shimano
Shimano System:	Shimano E8000, Shimano Steps E7000 (E-MTB), Shimano Steps EP8
Item:	SHIMANO STEPS SM-CRE80 chainring single
Scope of delivery:	1 chainring (without spider and screws)
Colour:	black
Compatibility:	SHIMANO STEPS | EP8 | E7000 | E8000 drive
Specifications:	Dynamic Chain Engagement Technology
Material:	steel
Field of application:	eMTB | MTB optimized
Switching steps:	For 1 x 12-fach
Chainline:	depending on spider
Bolt circle diameter:	104mm | 4-Arm
Number of teeth:	34T | 36T | 38T
Recommended chain:	CN-M9100 | CN-M8100 | CN-M7100 | CN-M6100